Office Building Scope Sheet

Complete cleaning specs for final construction cleaning office buildings.



  1. Detail Construction Clean-up: 
    1. Thoroughly sweep, vacuum and wet mop all floors              
    2. Detail dust and wipe down all walls, baseboards, doors, surfaces, fixtures, vents etc…   
    3. Detail clean all common areas, corridors, lunchrooms, etc…
    4. Detail clean all offices, conference room, etc…
    5. Dust and damp wipe all horizontal and vertical moldings and surfaces, door jams and ledges.           
    6. Clean all interior glass surfaces on both sides; Remove any stickers or labels. 
    7. Clean Toilet Rooms – walls, floors, light lenses, toilets, sinks, counters, partitions, mirrors, fixtures and accessories; disinfect sinks and fixtures.
    8. Wipe down both sides and tops of all doors.
    9. Vacuum carpeting and similar soft surfaces, removing debris and excess nap;   
    10. Clean transparent materials, including mirrors and glass in doors.  

                                                    i.     Remove glazing compounds and other noticeable, vision obscuring materials.

                                                  ii.     Polish mirrors and glass, taking care not to scratch surfaces.

    1. Vacuum and damp wipe all cabinetry, casework, millwork and countertops, inside and out.              
    2. Wipe down all door frames.   
    3. Wipe down pipe and equipment in mechanical and electrical rooms and fire sprinkler rooms.        
    4. Wipe down all structure columns to 10 ‘ above finished floor.          
    5. Remove any minor trash found in building.   
    6. Wipe down all FRP and ceramic wall tile.     
    7. Wipe down sanitary cove base.        
    8. Clean all maintenance closets’ sinks, walls, and floor surfaces.                  
    9. Leave project clean and ready for occupancy.
    10. Prior to final completion, conduct an inspection of sight-exposed interior surfaces and all work areas with construction manager to verify that entire Work is clean.
  1. Strip and Refinish VCT Flooring
    1. Scrub VCT Floor using an auto scrubber with maximum pad pressure equipped with black pads or stripping brushes to remove dirt and factory finish.
    2. Thoroughly rinse floor to remove any residue of cleaning or stripper solution.
    3. Let floor dry completely.
    4. Apply sealer coat and let completely dry
    5. Apply 2 new finish coats
  2. Window cleaning – Inside and outside
    1. Wash and scrape all windows
    2. Wipe down all window framing


Call Us 8am - 5pm EST or email us for a response by the next business day.

Coast To Coast Post-Construction Cleaning

Call Us 8am - 5pm Est. or email us for a response by the next business day.

Coast To Coast Post-Construction Cleaning